Search
Filters
Close

Weld Star - A30 (ER 70S-A1) TIG Wire (1.6mm) 5kg

Each
Availability: In stock
Order Code: 3010300421

Features and Applications

A copper coated heat-resisting wire containing 0.5% molybdenum.

Designed for welding low alloy creep resistant steels that require a high tensile strength.

Weld deposit highly resistant to cold cracking.

Recommended working temperatures of up to 500°C.

Typically used on creep steels for construction steam boilers, pressure tanks, gas pipes, shipbuilding sector, petrochemical industry, heat exchangers, building of cranes, bridges etc.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Test Certificates can be found online @wilkinsonstar247.com

  

Typical Base Materials

P295GH, P355GH, 16Mo3, 17Mo3, 14Mo6, S275, S355, S420, A210, A285, A335, A516, S275Ml, S355M, S420M, S460 15Mo3, 10MnMo45, 11MnMo45, GS60, GS22Mo4, 20MnMoNi5-5, 15NiCuMoNd5S, 17MnMoV64*
* Illustrative, not exhaustive list

 

Standards
EN ISO 636-A - W 2Mo
AWS A5.28 - ER 70S-A1

 

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%  
0.09 0.60 1.20 <0.015 <0.015 <0.25  
             
Cr% Ni% Mo% Al% V% Zr+Ti%  
<0.15 <0.10 0.50 <0.030 <0.020 <0.050  

 

Mechanical Properties (Typical)
Tensile Strength 610 MPa  
Yield Strength 520 MPa
 
Elongation 25%  
Impact Strength 150 J  >47 J
Test Temperature +20ºC  -40ºC

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Shielding Gases

EN ISO 14175 - TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF

 

Packaging Data
Diameter

Length

Weight  

1.60 mm

2.40 mm

3.20 mm

1000 mm

1000 mm

1000 mm

5 Kg

5 Kg

5 Kg

 

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Features and Applications

A copper coated heat-resisting wire containing 0.5% molybdenum.

Designed for welding low alloy creep resistant steels that require a high tensile strength.

Weld deposit highly resistant to cold cracking.

Recommended working temperatures of up to 500°C.

Typically used on creep steels for construction steam boilers, pressure tanks, gas pipes, shipbuilding sector, petrochemical industry, heat exchangers, building of cranes, bridges etc.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Test Certificates can be found online @wilkinsonstar247.com

  

Typical Base Materials

P295GH, P355GH, 16Mo3, 17Mo3, 14Mo6, S275, S355, S420, A210, A285, A335, A516, S275Ml, S355M, S420M, S460 15Mo3, 10MnMo45, 11MnMo45, GS60, GS22Mo4, 20MnMoNi5-5, 15NiCuMoNd5S, 17MnMoV64*
* Illustrative, not exhaustive list

 

Standards
EN ISO 636-A - W 2Mo
AWS A5.28 - ER 70S-A1

 

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%  
0.09 0.60 1.20 <0.015 <0.015 <0.25  
             
Cr% Ni% Mo% Al% V% Zr+Ti%  
<0.15 <0.10 0.50 <0.030 <0.020 <0.050  

 

Mechanical Properties (Typical)
Tensile Strength 610 MPa  
Yield Strength 520 MPa
 
Elongation 25%  
Impact Strength 150 J  >47 J
Test Temperature +20ºC  -40ºC

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Shielding Gases

EN ISO 14175 - TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF

 

Packaging Data
Diameter

Length

Weight  

1.60 mm

2.40 mm

3.20 mm

1000 mm

1000 mm

1000 mm

5 Kg

5 Kg

5 Kg

 

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

CE

UKCA