Search
Filters
Close

Weld Star - Alloy 59|ER NiCrMo-13 (2.4mm) 5kg

Each
Availability: In stock
Order Code: 6011100603

Features and Applications

Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content.

Versatile alloy with excellent wet corrosion resistance for the most demanding applications.

The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s.

Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc.

Test Certificates can be found online @wilkinsonstar247.com

  

Typical Base Materials

Alloy 22, Alloy 625, Alloy 276, Alloy 686*
* Illustrative, not exhaustive list

 

Standards
EN ISO 18274 - Ni 6059 - NiCr23Mo16
AWS A5.14 - ER NiCrMo-13

 

Chemical Composition %
C% Mn% Fe% P% S% Si%  
max max max  max max max  
0.010 0.50 1.50  0.020 0.005 0.08  
             
Ni% Co% Al% Cr% Mo%    
56.00 max 0.10 22.00 15.00    
min 0.30 0.40 24.00 16.50    

 

Mechanical Properties
Tensile Strength ≥760 MPa  
Yield Strength -  
Elongation -  
Impact Strength -
 

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Shielding Gases

EN ISO 14175 - TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF

 

Packaging Data
Diameter

Length

Weight  

1.60 mm

2.40 mm

3.20 mm

1000 mm

1000 mm

1000 mm

5 Kg

5 Kg

5 Kg

 

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Features and Applications

Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content.

Versatile alloy with excellent wet corrosion resistance for the most demanding applications.

The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s.

Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc.

Test Certificates can be found online @wilkinsonstar247.com

  

Typical Base Materials

Alloy 22, Alloy 625, Alloy 276, Alloy 686*
* Illustrative, not exhaustive list

 

Standards
EN ISO 18274 - Ni 6059 - NiCr23Mo16
AWS A5.14 - ER NiCrMo-13

 

Chemical Composition %
C% Mn% Fe% P% S% Si%  
max max max  max max max  
0.010 0.50 1.50  0.020 0.005 0.08  
             
Ni% Co% Al% Cr% Mo%    
56.00 max 0.10 22.00 15.00    
min 0.30 0.40 24.00 16.50    

 

Mechanical Properties
Tensile Strength ≥760 MPa  
Yield Strength -  
Elongation -  
Impact Strength -
 

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Shielding Gases

EN ISO 14175 - TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF

 

Packaging Data
Diameter

Length

Weight  

1.60 mm

2.40 mm

3.20 mm

1000 mm

1000 mm

1000 mm

5 Kg

5 Kg

5 Kg

 

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.