Features and Applications
Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content.
Versatile alloy with excellent wet corrosion resistance for the most demanding applications.
The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s.
Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
Alloy 22, Alloy 625, Alloy 276, Alloy 686*
* Illustrative, not exhaustive list
| Standards |
EN ISO 18274 - Ni 6059 - NiCr23Mo16
|
AWS A5.14 - ER NiCrMo-13
|
| Chemical Composition % |
| C% |
Mn% |
Fe% |
P% |
S% |
Si% |
|
| max |
max |
max |
max |
max |
max |
|
| 0.010 |
0.50 |
1.50 |
0.020 |
0.005 |
0.08 |
|
| |
|
|
|
|
|
|
| Ni% |
Co% |
Al% |
Cr% |
Mo% |
|
|
| 56.00 |
max |
0.10 |
22.00 |
15.00 |
|
|
| min |
0.30 |
0.40 |
24.00 |
16.50 |
|
|
Mechanical Properties
|
| Tensile Strength |
≥760 MPa |
|
| Yield Strength |
- |
|
| Elongation |
- |
|
| Impact Strength |
-
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF
| Packaging Data |
Diameter
|
Length
|
Weight |
|
|
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
|
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
