Features and Applications
Alloy 617 is a high temperature wire used for welding of nickel-chromium-cobalt-molybdenum alloys.
Ideal for overlay cladding where similar alloy is required, such as gas turbines and ethylene equipment.
Suitable for joining dissimilar alloys where high temperature strength and oxidation resistance are required up to about 1150°C.
Typically used in the aerospace and power generation industries, including petrochemical plants for applications such as nitric acid catalyst grids etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
Inconel alloys 600 and 601, Incoloy alloys 800 HT and 802 and cast alloys such as HK40, HP and HP45 Modified. UNS Number N06617, 2.4663, 1.4952, 1.4958, 1.4959, NiCr21Co12Mo, X6CrNiNbN 25 20, X5NiCrAlTi 31 20, X8NiCrAlTi 32 21, Alloy 617, N08810, N08811*
* Illustrative, not exhaustive list
| Standards |
EN ISO 18274 - Ni 6617 - NiCr22Co12Mo9
|
AWS A5.14 - ER NiCrCoMo-1
|
| Chemical Composition % |
| C% |
Mn% |
Fe% |
P% |
S% |
Si% |
Cu% |
| 0.05 |
max |
max |
max |
max |
max |
max |
| 0.10 |
1.00 |
1.00 |
0.020 |
0.015 |
0.50 |
0.50 |
| |
|
|
|
|
|
|
| Ni% |
Co% |
Al% |
Ti% |
Cr% |
Mo% |
|
| 44.00 |
10.00 |
0.80 |
max |
20.00 |
8.00 |
|
| min |
14.00 |
1.50 |
0.60 |
24.00 |
10.00 |
|
Mechanical Properties
|
| Tensile Strength |
≥620 MPa |
|
| Yield Strength |
- |
|
| Elongation |
- |
|
| Impact Strength |
-
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Length
|
Weight |
|
|
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
|
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
