Features and Applications
Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc.
Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures.
Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay.
Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family.
Precision layer wound for superior wire feeding characteristics.
Typically used in the power generation and petrochemical industries etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330*
* Illustrative, not exhaustive list
| Standards |
EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb
|
AWS A5.14 - ER NiCr-3
|
| Chemical Composition % |
| C% |
Mn% |
Fe% |
P% |
S% |
Si% |
|
| max |
2.50 |
max |
max |
max |
max |
|
| 0.05 |
3.50 |
3.00 |
0.030 |
0.015 |
0.50 |
|
| |
|
|
|
|
|
|
| Cu% |
Ni% |
Co% |
Ti% |
Cr% |
Nb+Ta% |
|
| max |
67.00 |
max |
max |
18.00 |
2.00 |
|
| 0.50 |
min |
1.00 |
0.75 |
22.00 |
3.00 |
|
Mechanical Properties
|
| Tensile Strength |
≥600 MPa |
|
| Yield Strength |
≥360 MPa |
|
| Elongation |
≥30 MPa |
|
| Impact Strength |
≥100 MPa |
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - I1, I3
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
1.00 mm
1.20 mm
|
15 Kg
15 Kg
|
BS300
BS300
|
72
72
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
