Features and Applications
Basic coated low hydrogen hardfacing electrode for depositing tough wear resisting overlays.
Ideal for application subject to hard impact and abrasion on unalloyed and low-alloyed materials.
A tough buffer layer is recommended for crack sensitive base metals.
Suitable for low open circuit voltage transformers (min. OCV 70V).
Typical applications include hardfacing excavator parts, bucket edges, bucket teeth, drilling bits, coal planes, conveyor screws, polygon edges, crusher jaws, cones etc.
Re-drying if necessary 300-350°C for 2 hours.
Test Certificates can be found online @wilkinsonstar247.com
| Standards |
DIN 8555 - E6-UM-60P
|
| Analysis of all-weld metal % (Typical) |
| C% |
Si% |
Mn% |
Cr% |
Fe% |
| 0.50 |
1.00 |
1.00 |
7.00 |
rem. |
Mechanical Properties (Typical)
|
Hardness
|
57-64 HRC |
|
Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.
| Welding Parameters |
| Ømm |
Current (A) |
3.20 mm
|
100-140 |
| 4.00 mm |
140-180 |
| 5.00 mm |
180-240 |
Polarity
AC; DC (+)
Welding Positions
EN ISO 6947 - PA, PB, PC, PF
| Packaging Data |
Diameter x Length ø (mm)
|
Packet Weight (kg)
|
Electrode Pieces Per/Packet |
Carton Weight (kg) |
|
3.20 x 350
4.00 x 350
5.00 x 350
|
5
5
5
|
~146
~92
~61 |
15
15
15
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
