Features and Applications
Rutile flux cored stainless steel wire for gas-shielded arc welding.
23% chromium - 9% nickel - 3% molybdenum - nitrogen - low carbon duplex stainless steel deposit.
Exceptional resistance to moisture pick-up.
Attractive bead appearance, very good penetration and high productivity.
Excellent X-ray soundness.
Maximum performance in the flat and horizontal positions.
Ideal for heterogeneous welding between duplex stainless steels and other stainless and mild or low alloyed steels.
Precision layer wound for superior wire feeding characteristics.
Suitable for wrought, forged or cast duplex stainless steels for service in the as-welded condition.
Test Certificates can be found online @wilkinsonstar247.com
|
Typical Base Materials
|
|
AISI
S31803
S32205
S32304
S32202
S32003
S32101
|
EN Symbol
X2CrNiMoN 22-5-3
-
X2CrNiN 23 4
-
-
X2CrMnNiN 22-5-2
|
|
* Illustrative, not exhaustive list
|
| Standards |
EN ISO 17633-A - T 22 9 3 N L R M21 3 - T 22 9 3 N L R C1 3
|
AWS A5.22 - E2209T0-4 - E2209T0-1
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
Cr% |
Ni% |
Mo % |
N% |
| 0.03 |
1.2 |
0.8 |
23 |
9 |
3.1 |
0.14 |
Mechanical Properties (Typical)
|
| Shielding Gas |
M21 |
|
| Tensile Strength |
830 MPa |
|
| Yield Strength |
650 MPa |
|
| Elongation |
26% |
|
| Impact Strength |
27 J |
|
| Test Temperature |
-50ºC
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters |
| Ømm |
Current (A) |
Voltage (V) |
1.20 mm
|
100-280 |
23-33 |
Shielding Gases
EN ISO 14175 - C1, M21
Welding Positions
EN ISO 6947 - PA, PB
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
1.20 mm
|
15 Kg
|
BS300
|
72
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
