Features and Applications
Rutile flux cored stainless steel wire for gas-shielded arc welding.
19% chromium - 9% nickel - low carbon deposit.
Specifically designed for out-of-position welding.
Attractive bead appearance, very good penetration, excellent X-ray soundness.
Maximum productivity for completion of vertical welds.
Precision layer wound for superior wire feeding characteristics.
Suitable for welding stainless steels with an alloy content between 16 to 21% Cr and 8 to 13% Ni, stabilised or not.
Test Certificates can be found online @wilkinsonstar247.com
|
Typical Base Materials
|
|
AISI
302
304
304L
304LN
305
308
321
347
|
UNS
S30200
S30400
S30403
S30453
J92701
S30800
S32100
S34700
|
EN Symbol
X12 CrNi 18 8
X5 CrNi 18-10
X2 CrNi 19-11
X2 CrNiN 18-10
GX10 CrNi 18-8
X4 CrNi 18-12
X6 CrNiTi 18-10
X6 CrNiNb 18-10
|
|
* Illustrative, not exhaustive list
|
| Standards |
EN ISO 17633-A - T 19 9 L P M21 1 / T 19 9 L P C1 1
|
AWS A5.22 - E308LT1-4 - E308LT1-1
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
Cr% |
Ni% |
S% |
P% |
| 0.03 |
1.40 |
0.70 |
20.0 |
10.5 |
0.008 |
0.020 |
Mechanical Properties (Typical)
|
| Shielding Gas |
M21 |
|
| Tensile Strength |
620 MPa |
|
| Yield Strength |
460 MPa |
|
| Elongation |
40% |
|
| Impact Strength |
35 J |
|
| Test Temperature |
-196ºC
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters |
| Ømm |
Current (A) |
Voltage (V) |
1.20 mm
|
130-270 |
22-35 |
Shielding Gases
EN ISO 14175 - C1, M21
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
1.20 mm
|
15 Kg
|
BS300
|
72
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
