Features and Applications
Rutile flux cored stainless steel wire for gas-shielded arc welding.
24% chromium - 13% nickel - low carbon deposit.
Attractive bead appearance, automatic slag release, very good penetration and high productivity.
Excellent X-ray soundness.
Maximum performance in the flat and horizontal positions.
Ideal for welding stainless steels of similar composition or ferritic stainless steels.
Precision layer wound for superior wire feeding characteristics.
Application include joining stainless steels to mild and low-alloyed steels. Also rebuilding and buffering before cladding or hardfacing.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
Dissimilar welds between stainless steel types 304, 304L, 316, 316L, 318, 316Ti,321, 410 or ferritic stainless steel types 1.4713, 1.4724, 1.4742, 3Cr12, to non or low alloyed CMn steels, for service temperatures up to 400°C*
* Illustrative, not exhaustive list
| Standards |
EN ISO 17633-A - T 23 12 L R M21 3 / T 23 12 L R C1 3
|
AWS A5.22 - E309LT0-4 - E309LT0-1
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
Cr% |
Ni% |
S% |
P% |
| 0.03 |
1.40 |
0.70 |
23.5 |
13.0 |
0.008 |
0.020 |
Mechanical Properties (Typical)
|
| Shielding Gas |
M21 |
|
| Tensile Strength |
580 MPa |
|
| Yield Strength |
460 MPa |
|
| Elongation |
32% |
|
| Impact Strength |
40 J |
|
| Test Temperature |
-60ºC
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters |
| Ømm |
Current (A) |
Voltage (V) |
1.20 mm
|
100-280 |
23-33 |
Shielding Gases
EN ISO 14175 - C1, M21
Welding Positions
EN ISO 6947 - PA, PB
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
1.20 mm
|
15 Kg
|
BS300
|
72
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
