Features and Applications
Rutile flux cored stainless steel wire for gas-shielded arc welding.
19% chromium - 12% nickel - 3% molybdenum - low carbon deposit.
Attractive bead appearance, automatic slag release, very good penetration and high productivity.
Excellent X-ray soundness.
Specifically designed for out-of-position welding.
Maximum productivity for completion of vertical welds.
Precision layer wound for superior wire feeding characteristics.
Suitable for welding stainless steels with an alloy content between 16 to 21% Cr, 6 to 13% Ni and up to 3% Mo, stabilised and un-stabilised types.
Test Certificates can be found online @wilkinsonstar247.com
|
Typical Base Materials
|
|
AISI
316
316L
316LN
316Ti
318
|
UNS
S31600
S31603
S31653
S31635
S31640
|
EN Symbol
X5 CrNiMo 17-12-2
X2 CrNiMo 17-13-2
X2 CrNiMoN 17-12-2
X6 CrNiMoTi 17-12-2
X10CrNiMoNb 18-12
|
|
* Illustrative, not exhaustive list
|
| Standards |
EN ISO 17633-A - T 19 12 3 L P M21 1 / T 19 12 3 L P C1 1
|
AWS A5.22 - E316LT1-4 - E316LT1-1
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
Cr% |
Ni% |
Mo % |
S% |
P% |
| 0.03 |
1.40 |
0.80 |
19.0 |
12.0 |
2.90 |
0.008 |
0.020 |
Mechanical Properties (Typical)
|
| Shielding Gas |
M21 |
|
| Tensile Strength |
600 MPa |
|
| Yield Strength |
490 MPa |
|
| Elongation |
35% |
|
| Impact Strength |
50 J |
|
| Test Temperature |
-60ºC
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters |
| Ømm |
Current (A) |
Voltage (V) |
1.20 mm
|
130-270 |
22-35 |
Shielding Gases
EN ISO 14175 - C1, M21
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
1.20 mm
|
15 Kg
|
BS300
|
72
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
