Features and Applications
Seamless rutile flux cored wire suitable for applications where low temperature notch toughness is required.
The wire has excellent weld puddle manipulation and superior out-of-position weldability.
Provides low spatter and an easy slag removal for single or multiple pass applications.
Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g.
Extremely low hydrogen levels giving more resistance to cracking.
Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004.
Precision layer wound for superior wire feeding characteristics.
Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc.
Test Certificates can be found online @wilkinsonstar247.com
|
Typical Base Materials
|
|
Shipbuilding steels
Structural steels
Boiler steels
Pipe steels
Fine grain steels
Steel acc. API-standard
|
A, B, D, AH 32 - EH 36
185 - S355, A 106 Gr.B, A 333 Gr. 6
P235GH - P485GH up to A516; A537, A455
P235T1/T2 - P485NL2; L210 - L485MB up to A 572
S235 - S500 (NL1,2) up to A 572
X42 - X70
|
|
* Illustrative, not exhaustive list
|
| Standards |
EN ISO 17632-A - T 50 (46) 6 (4) 1Ni P M21 (C1) 1 H5
|
AWS A5.29 - E81T1-Ni1M(C1)-J H4
|
| Chemical Composition % (Typical) |
| C% |
Si% |
Mn% |
P% |
S% |
Cr% |
Ni% |
| 0.03 |
0.35 |
1.09 |
0.009 |
0.015 |
0.033 |
0.806 |
| |
|
|
|
|
|
|
| Mo% |
Cu% |
Al% |
V% |
Ti% |
Nb% |
|
| 0.006 |
0.133 |
0.006 |
0.015 |
0.034 |
0.015 |
|
Mechanical Properties (Typical)
|
| Shielding Gas |
M21 |
|
| Tensile Strength |
620 MPa |
|
| Yield Strength |
550 MPa |
|
| Elongation |
26% |
|
| Impact Strength |
90 J |
60 J |
| Test Temperature |
-40ºC
|
-60ºC |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters |
1.20 mm
|
160-280 |
21-29 |
| 1.60 mm |
190-350 |
23-32 |
Shielding Gases
EN ISO 14175 - C1, M21
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
1.20 mm
|
16 Kg
|
BS300
|
64
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
