Features and Applications
Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium.
Offers good corrosion resistance in nitric acid environments.
Good mechanical properties at sub-zero temperatures down to -197ºC.
Typically used on applications where a good atmospheric corrosion resistance in urban and rural medias is expected, pipes/tubes, boiler engineering, food processing and chemical industries etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
All 300 series austenitic stainless steel*
* Illustrative, not exhaustive list
| Standards |
EN ISO 14343-A - W 19 9 L
|
AWS A5.9 - ER 308L
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
S% |
P% |
|
|
| 0.021 |
1.80 |
0.43 |
0.005 |
0.027 |
|
|
| |
|
|
|
|
|
|
| Ni% |
Cr% |
Mo% |
Cu% |
|
|
|
| 11.19 |
18.70 |
2.62 |
0.30 |
|
|
|
Mechanical Properties
|
| Tensile Strength |
≥510 MPa |
|
| Yield Strength |
≥320 MPa
|
|
| Elongation |
≥25 %
|
|
| Impact Strength |
≥80 J
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Length
|
Weight |
|
|
1.00 mm
1.20 mm
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
5 Kg
5 Kg
|
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
