Search
Close

Weld Star - ER 309L Stainless TIG Wire (2.4mm) 5kg

Each
Availability: Out of stock
Order Code: 6011100335

Features and Applications

Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium.

Good performance under carburising atmospheres.

High temperature oxidation and corrosion resistance.

ER 309L can be used to weld dissimilar steels and buffer layers.

Ideal for joining and overlay of stainless steels of similar composition, such as AISI 309 castings, and for joining of 3Cr12.

Typically used on applications in industrial furnaces and boiler parts, annealing chambers, heat exchangers, fused salt treatment installations etc.

Test Certificates can be found online @wilkinsonstar247.com

  

Typical Base Materials

All 300 series austenitic stainless steel, 3Cr12, mild steels (cladding)*

* Illustrative, not exhaustive list

 

Standards
EN ISO 14343-A - W 23 12 L
AWS A5.9 - ER 309L

 

Chemical Composition % (Typical)
C% Mn% Si% S% P%    
0.019 1.82 0.34 0.010 0.025    
             
Ni% Cr% Mo% Cu%      
12.70 23.35 0.060 0.07      

 

Mechanical Properties
Tensile Strength ≥510 MPa  
Yield Strength ≥320 MPa
 
Elongation ≥25 %
 
Impact Strength ≥50 J
 

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Shielding Gases

EN ISO 14175 - TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

 

Packaging Data
Diameter

Length

Weight  

1.00 mm

1.20 mm

1.60 mm

2.40 mm

3.20 mm

1000 mm

1000 mm

1000 mm

1000 mm

1000 mm

5 Kg

5 Kg

5 Kg

5 Kg

5 Kg

 

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Features and Applications

Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium.

Good performance under carburising atmospheres.

High temperature oxidation and corrosion resistance.

ER 309L can be used to weld dissimilar steels and buffer layers.

Ideal for joining and overlay of stainless steels of similar composition, such as AISI 309 castings, and for joining of 3Cr12.

Typically used on applications in industrial furnaces and boiler parts, annealing chambers, heat exchangers, fused salt treatment installations etc.

Test Certificates can be found online @wilkinsonstar247.com

  

Typical Base Materials

All 300 series austenitic stainless steel, 3Cr12, mild steels (cladding)*

* Illustrative, not exhaustive list

 

Standards
EN ISO 14343-A - W 23 12 L
AWS A5.9 - ER 309L

 

Chemical Composition % (Typical)
C% Mn% Si% S% P%    
0.019 1.82 0.34 0.010 0.025    
             
Ni% Cr% Mo% Cu%      
12.70 23.35 0.060 0.07      

 

Mechanical Properties
Tensile Strength ≥510 MPa  
Yield Strength ≥320 MPa
 
Elongation ≥25 %
 
Impact Strength ≥50 J
 

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Shielding Gases

EN ISO 14175 - TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

 

Packaging Data
Diameter

Length

Weight  

1.00 mm

1.20 mm

1.60 mm

2.40 mm

3.20 mm

1000 mm

1000 mm

1000 mm

1000 mm

1000 mm

5 Kg

5 Kg

5 Kg

5 Kg

5 Kg

 

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Product tags