Features and Applications
Austenitic stainless steel wire used for welding alloys of a similar chemical composition.
Ideal for severely corrosive environments where crevice and pitting corrosion are of concern.
Low carbon content reduces the possibilities of intergranular carbide precipitation.
Not suitable for structural service above 400°C or for cryogenic applications.
Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance.
Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
Stainless CrNiMo steels e.g. 317L or similar*
* Illustrative, not exhaustive list
| Standards |
EN ISO 14343-A - W 18 15 3 L
|
AWS A5.9 - ER 317 / 317L
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
S% |
P% |
|
|
| <0.03 |
1.43 |
0.45 |
<0.030 |
<0.030 |
|
|
| |
|
|
|
|
|
|
| Ni% |
Cr% |
Mo% |
Cu% |
|
|
|
| 13.60 |
18.82 |
3.55 |
<0.75 |
|
|
|
Mechanical Properties
|
| Tensile Strength |
≥480 MPa |
|
| Yield Strength |
≥300 MPa
|
|
| Elongation |
≥25 %
|
|
| Impact Strength |
- |
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Length
|
Weight |
|
|
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
|
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
