Features and Applications
Austenitic stainless steel wire with a significant presence of niobium, that provides resistance to intergranular chromium carbide precipitation, thus increasing the resistance to intergranular corrosion.
Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance.
Ideal for welding and overlay of chromium-nickel stainless steel base metals of similar composition, stabilised either by Nb or Ti (e.g. types 321 and 347).
Precision layer wound for superior wire feeding characteristics.
Typically used on applications for the chemical industry, particularly at high temperatures (e.g. equipment intermittently heated within a temperature range varying from 400°C to 800°C). Including applications such as firewalls, pressure vessels, food processing, dairy, oil and textile industries etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
All 300 series austenitic stainless steel, particularly 321 and 347 (stabilised)*
* Illustrative, not exhaustive list
| Standards |
EN ISO 14343-A - G 19 9 Nb Si
|
AWS A5.9 - ER 347Si
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
S% |
P% |
|
|
| 0.020 |
1.74 |
0.82 |
0.005 |
0.024 |
|
|
| |
|
|
|
|
|
|
| Ni% |
Cr% |
Mo% |
Cu% |
Nb% |
|
|
| 9.55 |
19.50 |
0.050 |
0.04 |
0.205 |
|
|
Mechanical Properties
|
| Tensile Strength |
≥550 MPa |
|
| Yield Strength |
≥350 MPa
|
|
| Elongation |
≥25 %
|
|
| Impact Strength |
≥50 J
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters - M12 |
| Ømm |
Current (A) |
Voltage (V) |
| 0.80 mm |
40-120 |
15-20 |
| 1.00 mm |
80-160 |
16-22
|
1.20 mm
|
100-210 |
17-23 |
| Welding Parameters - M13 |
| Ømm |
Current (A) |
Voltage (V) |
| 0.80 mm |
160-210 |
24-28 |
| 1.00 mm |
180-280 |
25-30
|
1.20 mm
|
200-300 |
26-32 |
Shielding Gases
EN ISO 14175 - M12, M13
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF
| Packaging Data |
Diameter
|
Weight
|
Spool |
Pallet Qty
|
|
0.80 mm
1.00 mm
1.20 mm
|
15 Kg
15 Kg
15 Kg
|
D300
D300
D300
|
72
72
72
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
