Features and Applications
Copper coated, Ni-alloy (2,5% Ni), solid wire for low temperature, fine grained and austempering steels.
Excellent impact toughness due to the addition of Nickel.
Good mechanical properties at sub-zero temperatures down to -60°C.
Especially suitable for use in the offshore industry.
Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc.
Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
S235NL2, 14Ni6, 12Ni14, X12Ni5, S255N, S380N, S255NL, S380NL, S255NL1, S380NL1 ; A333: Gr. 1-3, A422: Gr.55-60, A334: Gr.3 ; 0Ni14, 13MnNi63, TTStE 355, TTStE 460, HY 80, TTStE 35 N*
* Illustrative, not exhaustive list
| Standards |
EN ISO 636-A - W 2Ni2
|
AWS A5.28 - ER 80S-Ni2
|
| Chemical Composition % (Typical) |
| C% |
Si% |
Mn% |
P% |
S% |
Cu% |
| 0.08 |
0.50 |
1.10 |
<0.150 |
<0.150 |
<0.25 |
| |
|
|
|
|
|
| Cr% |
Ni% |
Mo% |
Al% |
V% |
Zr+Ti% |
| <0.15 |
2.50 |
<0.15 |
<0.200 |
<0.030 |
<0.50 |
Mechanical Properties (Typical)
|
| Tensile Strength |
630 MPa |
|
| Yield Strength |
530 MPa
|
|
| Elongation |
26% |
|
| Impact Strength |
100 J |
|
| Test Temperature |
-60ºC |
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF
| Packaging Data |
Diameter
|
Length
|
Weight |
|
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
