Features and Applications
Stainless steel wire designed to weld stainless steels of similar composition, including deposition of overlays on carbon steels to resist corrosion, erosion and abrasion.
ER 410 contains sufficient carbon to enable air-hardening transformation of the weld metal to a predominately martensitic microstructure.
Preheat and postweld heat treatments are required to achieve welds of adequate ductility for many engineering purposes.
Ideal for welding or repairing 12% Cr air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15.
Typically used on applications for heat furnaces and turbine part production etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel*
* Illustrative, not exhaustive list
| Standards |
EN ISO 14343-A - W 13
|
AWS A5.9 - ER 410
|
| Chemical Composition % (Typical) |
| C% |
Mn% |
Si% |
S% |
P% |
|
|
| 0.015 |
0.55 |
0.48 |
0.004 |
0.028 |
|
|
| |
|
|
|
|
|
|
| Ni% |
Cr% |
Mo% |
Cu% |
|
|
|
| 0.37 |
12.90 |
0.08 |
0.15 |
|
|
|
Mechanical Properties
|
| Tensile Strength |
≥450 MPa |
|
| Yield Strength |
≥250 MPa
|
|
| Elongation |
≥15 %
|
|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 - TIG: I1 (Argon)
Welding Positions
EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Packaging Data |
Diameter
|
Length
|
Weight |
|
|
1.60 mm
2.40 mm
3.20 mm
|
1000 mm
1000 mm
1000 mm
|
5 Kg
5 Kg
5 Kg
|
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
